Security Company Near Chandler

Service Ticket #4006 performed on 8/16/24 Demo Contractor removed Data cable to Verkada Access Control causing it to crash. Used Lieberman Data Drop temporarily. Problem resolved.

Knine expanded MPOE and Riser Room Doors with S2 Knine installed 3/4 EMT to reach door from the MPOE rack. Knine installed Cable. Knine installed owner furnished readers, controllers, and cards. Knine installed new power supply. Knine installed RIM strike for the MPOE door. Knine installed Fire Rated strike for riser room. Knine installed door sensors and rex motions for both doors. Knine configured doors for all inputs, outputs, and readers.

We demo cable at pole in existing space. Installed 2 doors of access control on to the existing S2 system. Added cable for 38 new locations. 18 for cubes and printers on IT side, 20 for cubes on opposite side due to cable being too short. Extend 100 cable to accommodate cube locations.

We removed existing front and rear door magnetic locks. We then installed new 1200# Magnetic locks. Installed new armature plate on door.

We mounted TV in a office and added an outlet for poser behind the TV. We Added and outlet for data Behind modular TV.

We installed 4 Indoor Mini Domes 3 Verkada J-Box cover for Mini Dome

-We removed 1 camera on the east exterior side of the building and replaced with a new panoramic camera. -Removed existing camera on the east interior of that same door and replaced with a fisheye camera on the ceiling. -At the north double doors, we removed old dome cameras and replace with a fisheye camera. Add 2 new done cameras left and right viewing the length of the building. -At the south double doors, we removed old dome cameras and replaced with a fisheye camera. Added 2 new dome cameras left and right viewing the length of the building. -We installed new CAT6 cable as needed to support 4 new cameras. -We installed new CAT6 cable and wall mounted fisheye camera for a panoramic view in the generator area.

We installed 3/4 EMT to each door from the MPOE rack. Installed cable. Installed readers, controllers, and cards. Installed new power supply. Installed RIM strike for the MPOE door. Installed Fire Rated Strike for riser room. Installed door sensors and rex motions for both doors. Configured doors for all inputs, outputs, and readers.

We installed a network nobe and connected to existing cable to 4 doors. Installed new multitech readers and lock power source.

Replace strike onsite.