K9 All Systems is your local security company near Norcross with the knowledge and skill necessary to design a comprehensive solution for your company security needs.
Project Description: K9AS installed the QT PPD Hardware and cabling according to drawings provided by Advanced Alarms.
Project Description: K9 installed all Low Voltage Devices according to CoffeeWow project plans provided by Dodge. K9 ran cabling to the 2 Temp Sensors, 1 HVAC Control Module, 2 CAT6 Data Drops, and 1 Zone Expander for each store number listed. Cabling Includes CAT6, 18/4, and 22/4 All Devices provided by Advance Alarms
Project Description: K9AS installed the QT PPD Hardware and cabling according to drawings provided by Advanced Alarms.
Project Description: K9AS installed the QT PPD Hardware and cabling according to drawings provided by Advanced Alarms.
Project Description: K9AS installed the QT PPD Hardware and cabling according to drawings provided by Advanced Alarms.
Project Description: K9AS installed the QT PPD Hardware and cabling according to drawings provided by Advanced Alarms.
Project Description: K9AS installed the QT PPD Hardware and cabling according to drawings provided by Advanced Alarms.
Project Description: K9AS installed the QT PPD Hardware and cabling according to drawings provided by Advanced Alarms.
Project Description: K9AS installed the QT PPD Hardware and cabling according to drawings provided by Advanced Alarms.
Project Description: K9 installed all Low Voltage Devices according to CoffeeWow project plans provided by Dodge. K9 ran cabling to the 2 Temp Sensors, 1 HVAC Control Module, 2 Cat6 Data Drops, and 1 Zone Expander for each store number listed. Cabling Includes Cat6, 18/4, and 22/4 All Devices provided by Advance Alarms
Project Description: K9AS installed the QT PPD Hardware and cabling according to drawings provided by Advanced Alarms.
Project Description: K9AS installed the QT PPD Hardware and cabling according to drawings provided by Advanced Alarms.
Technician arrived at store 718 and got UPS online. Cleaned INT cameras 05,06. EXT cameras 03,05,06 was cleaned. 06 was adjusted. Base board management controller was brought back online.
Technician arrived at store 748. UPS online INT cameras 07, 13 was cleaned. Couldn't reach INT camera 09 as it wasn't possibly to get to it with a ladder due to the location it was mounted in the store. EXT cameras 07-12 is now reachable, EXT cameras 04, 07, 08, 09 and 10 was.
Technician arrived at store 750 UPS is now online. INT 5,6,11 is cleaned EXT 7,8,9,10,11 is cleaned EXT 2,4,5,7,8,9 is now reachable Radius did packet test and everything came back ok.
Technician arrived at store 714, UPS online. INT 2,3,5,6,7 EXT 7,8 cleaned and confirmed by radius.
Technician arrived at store 700, UPS online, INT 1,2,3,4,5,6,9,11 EXT 2 cleaned and confirmed by radius.
Technician arrived at store 703. Got UPS online and INT camera 15 got packet loss solved. EXT camera 16 needed a new cable run to switch as it was split when existing cable was tested. INT camera 08 got cleaned. EXT camera 14 got cleaned and confirmed by support.
Technician installed 2 relays and then called service center for testing. Everything was tested and everything is working as it should.
Technician replaced 1 relay and 2 sounders. He ran a new wire to the sounder towards the check stand as the old wire was missing. Called service center for testing and everything is working properly as they should.
Technician installed 2 relays and replaced 1 sounder. Called service center for testing and everything sounded and worked properly as it should.
Technician installed 2 relays and service and then called service center for testing. Everything is working and all sounders went off as it should.
Site requested a new exit button and to have the exit button moved back away from the gate. Technician installed timer button on front door and tested.
Knine got a request for service on a door that doesn't always close/lock with the strike. Knine looked at the front door closure that wasn't allowing it to close completely and the door was rubbing on the frame. We kept the strike but removed the wire, replaced it with a 600 series single maglock and adding a TS-9 button to allow egress.
Knine removed existing button and replaced it with a TS-2T. The button was moved over 2ft. Knine placed the new button in a 12X12 box with a weatherproof single gang inside as a mounting spot for the button.